Sears Kenmore 106.8639 Serie Manual De Uso Y Cuidado página 10

Reverse Doors (optional)
IMPORTANT: If you want to reverse your doors so that they
open in the opposite direction, follow these steps. If you are not
reversing the doors, see "Replace Doors and Hinges."
Graphics follow these instructions.
Door Hinge
Hole Plug
Cabinet
1.
Cabinet Hinge
Hole Plug
From the top of the cabinet, remove the hinge hole plugs,
move them to the opposite side, and insert the hole plugs
into the holes from where you removed the hinge screws.
See Graphic 1-2.
2. Remove the screws filling the holes to be used for the Center
Hinge and install them on the opposite side.
3. Move the leveler from the bottom of the refrigerator and
install it on the opposite side.
4. Move the parts of the top hinge, center hinge and bottom
hinge to the opposite side.
Doors
1. Remove door hinge hole plug from top of freezer door.
Move to opposite side as shown. See Graphic 2.
2. Remove the door stop from the bottoms of both the freezer
and refrigerator doors and install them on the opposite side.
See graphics 3 and 4.
Replace
Doors
and Hinges
NOTES:
Graphic may be reversed if door swing is reversed.
Provide additional support for the doors while the hinges are
being reinstalled. Do not depend on the door magnets to
hold the doors in place while you are working.
1. Replace the parts for the bottom hinge as shown. Tighten
screws. Replace the refrigerator door.
2. Assemble the parts for the center hinge as shown and
tighten all screws. See Center Hinge graphic. Replace the
freezer door.
3. Assemble the parts for the top hinge as shown. See Top
Hinge graphic. Do not tighten screws completely.
4. Align the doors so that the bottom of the freezer door is
even with the top of the refrigerator door. Tighten all screws.
Final Steps
Check all holes to make sure that hole plugs and screws are
in place.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug into a grounded 3 prong outlet.
3. Reset the controls. See "Using the Control(s)."
4. Return all removable door parts to doors and food to
refrigerator.
10