Skil 2436 Manual Original página 9

power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your finger
on the switch or energising power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or
wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the power
tool may result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair and clothing away from
moving parts. Loose clothes,
jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore
tool safety principles. A careless
action can cause severe injury within a
fraction of a second.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the
power source and/or remove the
battery pack, if detachable, from
the power tool before making any
adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the
reach of children and do not allow
All manuals and user guides at all-guides.com
e) Maintain power tools and
f) Keep cutting tools sharp and
g) Use the power tool, accessories
h) Keep handles and grasping
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger
b) Use power tools only with
c) When battery pack is not in use,
d) Under abusive conditions, liquid
9
persons unfamiliar with the power
tool or these instructions to
operate the power tool. Power tools
are dangerous in the hands of
untrained users.
accessories. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained
power tools.
clean. Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
and tool bits etc., in accordance
with these instructions, taking into
account the working conditions
and the work to be performed. Use
of the power tool for operations
different from those intended could
result in a hazardous situation.
surfaces dry, clean and free from
oil and grease. Slippery handles and
grasping surfaces do not allow for safe
handling and control of the tool in
unexpected situations.
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
keep it away from other metal
objects like paper clips, coins,
keys, nails, screws, or other small
metal objects that can make a
connection from one terminal to
another. Shorting the battery
terminals together may cause burns or
a fire.
may be ejected from the battery;
avoid contact. If contact