Tabla de contenido
Idiomas disponibles
Idiomas disponibles
associated
dangers
(otherwise, there is
a danger of
operating errors
and injuries)
• Supervise
children (this will
ensure that
children do not
play with the
charger)
• Cleaning and
user maintenance
of the battery
charger shall not
be made by
children without
supervision
• Do not use charger when cord or plug
is damaged; cord or plug should be
replaced immediately at one of the
officially registered SKIL Service
Stations
• Permitted ambient temperature (tool/
charger/battery):
-
when charging 0...+45°C
-
during operation –20...+50°C
-
during storage –20...+50°C
ACCESSORIES
• SKIL can assure flawless functioning
of the tool only when original
accessories are used
BEFORE USE
• Always check that the supply voltage
is the same as the voltage indicated
on the nameplate of the charger
• Avoid damage that can be caused by
screws, nails and other elements in
your workpiece; remove them before
you start working
All manuals and user guides at all-guides.com
• Secure the workpiece (a workpiece
• Use suitable detectors to find
DURING USE
• Hold the power tool by insulated
• In case of electrical or mechanical
EXPLANATION OF SYMBOLS ON
CHARGER
3 Read the instruction manual before
4 Only use the charger indoors
5 Double insulation (no earth wire
6 Fail-safe isolating transformer (the
7 Automatic shut-off when charger gets
8 Incorrect polarity of the charger
9 Do not dispose of electric tools and
USE
• Charging battery 0
11
clamped with clamping devices or in a
vice is held more securely than by
hand)
hidden utility lines or call the local
utility company for assistance
(contact with electric lines can lead to
fire or electrical shock; damaging a
gas line can result in an explosion;
penetrating a water pipe will cause
property damage or an electrical
shock)
gripping surfaces, when
performing an operation where the
fastener may contact hidden wiring
or its own cord (fasteners contacting
a "live" wire may make exposed metal
parts of the power tool "live" and could
give the operator an electric shock)
malfunction, immediately switch off
the tool or unplug charger from power
source
use
required)
power source is electrically separated
from the transformer output)
too hot (thermic fuse blows and
charger becomes useless)
connection could cause a hazard (only
charge the battery with the charger
supplied)
batteries together with household
waste material
-
battery of new tools is not fully
charged
!
unplug the charger from the
tool after charging period has
Tabla de contenido
