Airzone Easyzone ZS6 Guía Rápida página 45

•
Offset. This allows you to correct the room temperature measured in the different zones or
in all of them, due to deviations produced by sources of heat/cold nearby, with a correction
factor between -2.5°C / -5º F and 2.5°C / 5º F in steps of 0.5°C / 1º F. By default, it is set to 0°C/
32º F.
•
Weight. This option is used to set the weight of each zone for purposes of determining
system operation. The weight of the zone will be used for calculating the mode (auto-
change over) or for calculating heat demands when using auxiliary heat. Options: Auto or
Manual.
o Auto (by default). The weight of each zone is automatically assigned based on the
number of zones.
o Manual. Enables to manually define the weight of the zone. Values: 0 to 100.
•
Reset thermostat. (Not available in remote zones). This allows you to reset the thermostat
by returning to the initial settings menu.
EN
21