Standard Installation - Tripp-Lite B140-002 Manual Del Propietário

Standard Installation

Notes:
1. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable
must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size
higher than 24 AWG, will result in shorter extension distance. Higher gauge cabling, such
as 26 AWG, has a more limited transmission capability than lower gauge cabling. All
Tripp Lite N202-Series Cat6 cables are made with 24 AWG solid wire. Tripp Lite N022-
01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid wire bulk cables used in
applications that require a 110 punchdown termination.
3. The included 110 Punchdown tool is provided for your convenience. For best results,
it is recommended that you use a professional 110 Punchdown Installation Tool, such as
Tripp Lite's N046-000.
1. Make sure the DVI source is powered-OFF.
2. Connect the DVI source to the DVI port on the B140-002 or B140-004
3. Optional for B140-004: Connect a DVI monitor to the DVI port on the
201007212 93-2986.indb 5
All manuals and user guides at all-guides.com
labeled INPUT using a Tripp Lite P561-Series DVI-D Single-Link Cable.
B140-004 marked LOCAL using a Tripp Lite P561-Series DVI-D Single-
Link Cable.
B140-004
5
B140-1A0
B140-1P0
B140-1A0-WP
B140-1P0-WP
9/1/2010 3:48:11 PM