Installation Steps; Care And Cleaning - LUND Running Boards Instrucciones De Instalación

Installation Steps

Remove black rubber grommet from hole in
rocker panel and slide U-nut as pictured. Attach
U-nut in pinch weld as pictured.
2
NOTE: On 2014+ Double cab fitment the third
bracket is omitted.
Install square bolts into the shaded outer
channels. Four (4 ) per channel to attach
boards to brackets.
4

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We
take the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have
made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from drawings.
U-Nuts
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2014 Lund International, Inc. All rights reserved.
Lund and the Lund logo are trademarks of Lund International, Inc.
® ®
Attach bracket with bolts. Repeat
Steps 2 thru 3 for fourth bracket.
3
5
Page 2 of 2
1
2
2
Attach boards to brackets.
RUNNING
BOARD
8.5x18x2 Washer
5/16" Flanged Nut
1