For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-2409.
Important Safety Information
• CAUTION - Before driving, ensure that the bumper is properly secured to vehicle.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
M12 Hex Bolt (4)
M14 Hex Bolt (8)
Tools Required
Socket Wrench
Before Installation Remove Original Bumper
Using appropriate tools, remove the factory original rear bumper by removing all of the bolts and nuts holding the bumper to frame mount brackets. The original hardware
can be discarded as the installation kit contains all new necessary attaching hardware for your Trail Guard Bumper. Note: The original third brake light assemby will
be re-used later in this installation. If needed please reference original owners manual.
Instrucciones de instalación I-Número de hoja I-99513 Rev. A ® Parachoques trasero TrailGuard Para una instalación correcta y el mejor ajuste posible, lea todas las instrucciones ANTES de comenzar. Para pedir asistencia técnica u obtener piezas faltantes, llame a Atención al cliente al 1-800-328-2409. Información importante sobre seguridad •...
Pasos para la instalación NOTA: la aplicación real puede diferir levemente de las ilustraciones. Coloque el soporte del bastidor en el lado derecho/del pasajero del bastidor. Alinee el parachoques con los orificios en el bastidor. Utilice la herramienta de 14 mm para enmarcar el parachoques en el bastidor en ambos lados.