Installation Steps - LUND Genesis Tri-Fold Instrucciones De Instalación

Installation Steps

Place the cover assembly on the top of the
truck bed next to the cab.
1
Make sure there is no dust or debris on the
front rail. Turn cover over, apply supplied
foam tape to front rail of cover and trim to fit.
Flip cover over and place on truck as show
in Step 1, then proceed to Step 5.
3
Line up to front of bed first. Center the cover assembly on the truck. Position the cover assembly so the gaps on all
cover
5
The cover has retaining straps with quick-release buckles to keep it from being damaged when bulk hauling or
6
NOTE: Actual application may vary slightly from illustrations.
cover
sides are equal.
=
when it is not on the vehicle.
cover
If a gap exists between the cover and the bulkhead,
proceed to Step 3. If not proceed to Step 5.
2
Apply to trucks WITH bedliner. Will not
work with over the rail bedliners.
4
Approx 1/4" at
both corners
Page 2 of 6
cover