LUND RAMPAGE Trail Ram Center Bull Bar Instrucciones De Instalación

Idiomas disponibles

Idiomas disponibles

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the bumper is properly anchored to vehicle.
• Periodically check all components for tightness.
Contents
(1) Bull Bar
(4) 5/8" Bolts
(4) 5/8" Flat Washers
(4) 5/8" Nylon Locking Nuts
Tools Required
Marking tool
Ratchet
Preparation Before Installation
• A test fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Remove contents from the box and check for missing pieces or damage. If parts are missing or damaged,
please contact original place where item(s) were purchased.
Installation Instructions
Trail Ram Center Bull Bar
Wrench
Standard Socket
Page 1 of 2
I-Sheet Number: TM-03 Rev C
Safety Glasses
Center Punch
Drill
Tabla de contenido
loading

Resumen de contenidos para LUND RAMPAGE Trail Ram Center Bull Bar

  • Página 5: Preparación Antes De Instalar

    Instrucciones de instalación Hoja informativa N.º TM-03 Trail Ram Center Bull Bar Para una instalación adecuada y el mejor ajuste posible, lea todas las instrucciones ANTES de comenzar. Si desea recibir asistencia técnica o para obtener piezas faltantes, llame al Servicio de cliente al 1-800-241-7219. Información importante de seguridad •...
  • Página 6: Pasos De Instalación

    Felicidades! ® Usted ha comprado uno de los muchos productos de marca Lund de calidad ofrecidos por Lund Inernational, Inc. Nos sentimos orgullosos de nuestros productos y queremos que disfrute de años de satisfacción con su inversión. Hemos hecho todo lo posible para asegurar que sus productos son de primera calidad en términos de ajuste, durabilidad, y facilidad de instalación.

Tabla de contenido