Cameo FLAT PRO 7 G2 Manual De Usuario página 18

LOOP STANDALONE MODE
The Loop standalone mode allows you to individually configure, store and access up to four
different color changing programmes. Brightness, step time, fade time and delay (signal delay) are
also separately configurable.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Standalone and confirm with ENTER. Using the UP and DOWN buttons, select the
standalone mode Loop and confirm with ENTER. Using UP and DOWN, now select the desired
loop (Loop 1 to 4) and confirm with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER). The
settings for each loop are made separately and are retained even after restarting the device.
STANDALONE MODE LOOP (Loop 1 – Loop 4)
Dimmer Sets brightness
Step Sets step time
time
Fade Sets fade time in percent
time
Delay Delay time for slave groups
Step 1 15 colors from Color Preset
4 colors from User Color
Blackout
Step 2 „
Step 3 15 colors from Color Preset
4 colors from User Color
Blackout
---
Step 4 „
18
0–100
0.1 s to 10.0 s
0% to 100%
0.0 s to 2.0 s
Red – C White
User 1 to User 4
Blackout
„
Red – C White
User 1 to User 4
Blackout
Skip step
„