Cameo FLAT PRO 7 G2 Manual De Usuario página 15

Setting the DMX delay for DMX modes with DMX delay channel:
Starting from the main display, press MENU to enter the main menu. Use the buttons  and  to
select the menu item DMX Delay and confirm by pressing ENTER twice. Assign the spotlights to one
of up to 47 groups as desired (maximum group number depends on the activated DMX operating
mode). Multiple spotlights may be assigned to a group. The group number is also the factor by which
the set delay time is multiplied. Confirm each entry by pressing ENTER.
The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate
DMX delay channel of the corresponding DMX mode (0.0 s to 2.0 s in 0.1 s increments).
Setup example:
AUTO STANDALONE MODE
The 6 available auto-programmes each comprise non-editable color-change sequences; Random
scenes, brightness, speed and delay can be set separately for each programme in some cases.
Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to select
the Stand Alone menu item and confirm with ENTER. Use UP and DOWN again to select the Auto
standalone mode and confirm with ENTER. Now use UP and DOWN to select the desired programme
and confirm with ENTER.
15