Starting The Engine - Goodyear GY 1000TL Manual De Instrucciones

English
Owner´s manual
•
(For GY6100TL - GY6200DTL)
3) Air filter
Check that the filter is
not dirty or clogged
with dirt.
4) Fuel
Use unleaded gasoline or diesel (depending on
your model) for cars to help minimize the build-
up of deposits in the combustion chamber.
Never use an oil / gasoline or dirty gasoline
mixture. Prevent dirt, dust or water from entering
the fuel tank.
CAUTION: Do not fill the tank above the red level
line.
34
Orifice
oil filling
(For GY700TL-
GY1000TL)
Red level
line
NOTICE:
Gasoline is extremely flammable and explosive
under certain conditions. Do not allow smoking
or flames or sparks in the area where you are
going to refuel or where you are going to store
gasoline.
Do not overflow the fuel tank (there should be
no fuel in the neck of the tank). After refueling,
make sure the tank cap is properly placed and
closed.
Be careful not to spill fuel when filling. Spilled
fuel or fuel vapors may ignite. If you pour some
fuel, make sure the area is dry before starting
the engine.
Avoid repeated or prolonged contact with the skin or breathe
its vapors.
NOTE:
Damage to the power system or operational
problems caused by the use of fuels containing
alcohol are not covered by the warranty.
The motoazada cannot use fuels containing
methanol since the suitability tests have not yet
been completed.
Before buying fuel from an unknown service
station, try to find out if the fuel contains
alcohol, or if it does so according to the type and
percentage of the alcohol established.
If you notice any abnormality or symptom of
malfunction while using a gasoline that contains
alcohol, change it and use gasoline that you know
does not contain alcohol.
5)Tools
To install a tool or tooling to the motor hoe,
follow the instructions supplied with the tool or
tooling. Ask your supplier for advice and you have
any problems or if you have problems installing
the tool or tooling.

3. STARTING THE ENGINE

(For gasoline engines)
CAUTION:
Make sure there is no speed involved and
that the shift lever is in neutral to prevent any
uncontrolled movement when starting the
engine. The gears are engaged by pulling the
clutch lever and disengages by releasing the lever.