Midwest Feline Nuvo 139P-BL Manual De Instrucciones página 2

ASSEMBLY INSTRUCTIONS
Attach two Long Posts (I) and Cubby Post (B) to
1.
Base (A). The Long Posts will attach with Medium
Bolts (L) and Washers (Q) and the Cubby Post
attaches with a Short Bolt (M) and Washer(Q).
Insert Bolts and Washer through bottom of Base
through Cubby and Long Posts. Use Allen Wrench
to tighten. (May be easier to set on flat surface
while attaching parts to base.)
Place Triangle Platform (C) on top of Long Posts
2.
from step 1. Secure Triangle to Posts with a
Medium Bolt (L) in front and a Dual Threaded
Screw (O) in back. Use Allen Wrench to tighten Bolt
and place a Bolt Cover (P) over bolt after secure.
Insert Dual Threaded Screw on top of Platform and
tighten until bottom threads disappear.
Attach remaining Long Post (I) to Triangle
Platform, using a Dual Thread Screw (O). Insert
Screw on top of Platform and tighten until bottom
threads disappear. Then place Long Post on top
of Screw and rotate until secure.
Attach Cubby Tube (E) and Pront Toy (H) to
remaining corner of Triangle Platform. Screw one
Long Bolt (N) and Washer (Q) through Cubby Tube
then through Triangle Platform, and tighten with
Allen Wrench. Place Prong Toy (H) on top of Cubby
Tube over Long Bolt and rotate until secure.
Attach one Short Post (J) to top of Cubby Post
3.
using a Medium Bolt (L) and Washer (Q). Screw
bolt and washer up through top of Cubby
attaching to Short Post, use Allen Wrench to
tighten.
Place Circular Platform (D) on top of Short Post
and secure in place with a Dual Thread Screw (O),
tighten screw until bottom threads disappear. Attach
remaining Short Post (J) to Circular Platform by
placing on top of Dual Thread Screw and rotating
until secure.
Dual Thread
Screw (O)
Dual Thread
Screw (O)
Medium Bolt (L)
Long Bolt (N)
Medium Bolt (L)