Assembly Instructions for Model Number 1724SP , 1730SP , 1736SP , 1742SP
ImportAnt InformAtIon
Remove collars, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Not intended for puppies in the chewing stage, chronic chewers or aggressive dogs. Purchase a MidWest wire crate if you
think your pet might chew the fabric used in the Canine Camper as damage by untrained dogs is not covered by MIDWEST's
Limited Manufacturers Warranty. Use your Canine Camper Crate after your pet has been properly crate trained.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of
return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please
save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you
discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560
Assembly InstructIons
1.
Remove the tent crate from the packaging and lay crate
on flat surface with buckles facing up. Unclip the buckle
straps.
2.
Lift the handle on the top of crate, illustrated in Picture 1.
3.
Using both hands, push the sides out from inside the
crate. The wires should pop out leaving the crate in the
upright position, illustrated in Picture 2. Wrap the
hook and loop straps around the side support wires to
secure crate in place.
800-428-8560
midwesthomes4pets.com
P .O. Box 1031
Muncie, Indiana 47308
Picture 1
Picture 2
Lift handle
Hook and Loop Straps
Push Out