Radio (Am/Fm/Weather Band) Operation - Clarion CMS4 Manual De Instrucciones

Radio (AM/FM/Weather Band) Operation

¡ World Tuner
This unit is initially set to USA frequency intervals of
10 kHz for AM and 200 kHz for FM. When using it
outside the USA, the frequency reception range can
be switched to the intervals below.
U.S.A
standard
Frequency
10kHz
spacing
AM
530-1710
Frequency
range
kHz
Frequency
200kHz
spacing
FM
87.9-107.9
Frequency
range
MHz
¡ Auto Seek
Press the [ / ] buttons to automatically
search for the next radio station.
¡ Manual Seek
Rotate the [MENU] knob to manually change
intervals step by step.
12
CMS4
Europe Aisa Australia
standard standard standard
9kHz 9kHz 9kHz
531-1602 531-1620 531-1620
kHz kHz kHz
50kHz 50kHz 100kHz
87.5-108 87.5-108 87.5-108
MHz MHz MHz
¡ Tuner Settings
Press the [MENU] knob to access the Tuner
settings menu. Use the [MENU] knob to select the
below functions:
● Presets
Rotate the [MENU] knob to select which preset
station to listen to, then press [MENU] knob to
confirm.
● Save As Preset
Use the [MENU] knob to select the preset
position to save the current frequency.
● Auto Store
Only stations with sufficient signal strength will
be detected and stored as a preset. Press the
[MENU] knob to automatically select ten strong
stations and store them into ten presets. The
new stations replace presets.
● Preset Scan
Selecting preset scan will begin playing your
first saved preset for 10 seconds before
switching to your next preset. This will continue
until all presets have been played unless
a station is selected. Please see Name of
Buttons and Their Functions section for
further information.
● Local On/Off
To receive more radio stations or only stations
with strong signal, you can adjust the tuner
sensitivity.
Press the [MENU] knob to turn On or Off the
Local Seek Mode.
ON – Only stations with a strong signal can be
played back.
OFF – Stations with strong and weak signals
can be played back.
● RDS On/Off
Press the [MENU] knob to turn On or Off the
RDS Mode.
● PTY
Use the [MENU] knob to select the desired
PTY mode.