Standards Applied - Ambu aView 2 Advance Manual De Instrucciones

6. Maintenance and Disposal
6.1. Maintenance of Battery
To prolong battery life it is recommended to fully charge the displaying unit at least every
third month. If the battery is discharged the procedure can take up to 3 hours. The battery
should be charged at temperatures between 10 - 35°C.
If the battery needs replacement, only use spare parts supplied by Ambu. Do not modify
the spare parts. For more information contact your local Ambu representative.
6.2. Disposal
At the end of product life, open the displaying unit and dispose the battery and displaying unit
separately in accordance with local guidelines.
7. Technical Product Specifications

7.1. Standards Applied

The displaying unit function conforms with:
– IEC 60601-1 Medical electrical equipment – Part 1: General requirements for basic safety and
essential performance.
– IEC 60601-1-2 Medical electrical equipment – Part 1-2 General requirements for safety –
Collateral standard: Electromagnetic compatibility - Requirements for test.
– IEC 60601-2-18 Medical electrical equipment – Part 2-18: Particular requirements for
the basic safety and essential performance of endoscopic equipment
The power supply conforms with:
– IEC 60601-1 Medical electrical equipment – Part 1: General requirements for basic safety and
essential performance.
7.2. Specifications for aView 2 Advance
Display
Resolution
Orientation
Display type
Start up time
Connections
2 x USB connection
Digital video out
WIFI
LAN
Memory
Storage capacity
Mounting interface
Mounting interface standard
1920 x 1080 pixels
Landscape
12.8" colour TFT LCD
Immediately after pressing the power button
USB 3.0 Type A
HDMI and 3G-SDI (1920 x 1080p, 60 fps)
Supports IEEE Standards 802.11ac/a/b/g/n
Ethernet RJ45 connector, 10/100/1000 Mbps
32GB
VESA MIS-D, 75 C, VESA FDMI compliant display,
Part D, with centre located mounting interface
13