Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
7
Main power switch
• The main power switch
immediately and turn switch to "OFF" mode. This completely disconnects all power to the
machine.
4
Control panel
Auto-On (blue): This setting automatically starts the shredder upon loading paper into
the paper tray or inserting paper into the manual feed slot. When the paper has passed
through, the shredder automatically stops.
Off: This setting turns off all features of the shredder. For safety reasons, we recommend
that you leave the shredder in the "OFF" position when it is unattended or not in use.
Reverse: In the unlikely event of a paper jam, use the reverse setting to help clear
the cutters of paper that did not pass through. Never attempt to clear a jam using the
reverse function until you have emptied the wastebasket.
Forward: The forward setting can also be used to help clear the cutters in the event of
a paper jam. This allows you to manually activate the shredder to cutting mode.
LED status indicators
Overheat: The Red LED light indicates the shredder has shredded continuously
beyond the maximum running time, has overheated, and will automatically shut off. If
this happens, switch the shredder to "OFF" for 45 minutes or longer before resuming
normal operation.
Overload: The Red LED light indicates when too much paper is inserted. Use
"Reverse" mode to back up and reduce number of sheets.
Door open: The Red LED light indicates the shredder basket or top lid is not closed
properly. Shredders with pull-out wastebaskets feature a safety power cut-off upon bin
removal. Make sure the pull-out wastebasket is properly back in place and the blue
"Power On" indicator is lit.
7
must be "ON" to operate. In an emergency, stop the shredder
7
Tabla de contenido
