Idiomas disponibles
Idiomas disponibles
OBJ_BUCH-0000000279-002.book Page 33 Monday, November 20, 2017 4:30 PM
Handling the battery.
Operate and charge the battery only within the battery
operating-temperature range of 0°C – 45°C (32°F –
113°F). At the beginning of the charging procedure, the
battery temperature must be within the battery operat-
ing-temperature range.
LED indicator
Meaning
1 – 4 green
Percentage of
LED
charge condition
Continuous
Battery is almost
red light
empty
Red flashing
Battery is not
light
ready for opera-
tion
The real percentage of the battery charge condition is
only indicated when the power tool motor is stopped.
The electronics automatically switch off the motor prior
to the battery being deep discharged.
Repair and customer service.
When working metal under extreme operat-
ing conditions, it is possible for conductive
dust to settle in the interior of the power tool. Blow out
the interior of the power tool via the ventilation slots fre-
quently with dry and oil-free compressed air.
Renew stickers and warning indications on the power
tool when aged and worn.
After several hours of operation, the play in the dove-tail
guide can increase. As a consequence, the drill motor can
glide alongside the dove-tail guide by itself. In this case,
retighten all set screws of the dove-tail guide correspond-
ingly so that the drilling motor can easily be moved man-
ually, yet does not glide by itself (see page 18).
The current spare parts list for this power tool can be
found in the Internet at www.fein.com.
Use only original spare parts.
If required, you can change the following parts yourself:
Application tools, hand pump, battery
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty declaration.
The delivery scope of your power tool may include only
a part of the accessories described or shown in this
Instruction Manual.
Declaration of conformity.
FEIN declares itself solely responsible for this product
conforming with the relevant provisions given on the last
page of this Instruction Manual.
Technical documents at: C. & E. Fein GmbH, C-DB_IA,
D-73529 Schwäbisch Gmünd
Environmental protection, disposal.
Activity
Operation
Packaging, worn out power tools and accessories should
be sorted for environmental-friendly recycling.
Dispose of batteries only when discharged.
Charge battery
For batteries that are not completely discharged, insulate
the terminals with tape as a protective measure against
Bring the battery
short-circuiting.
into the battery
operating-tempera-
ture range, then
charge
en
33
