Package Contents; Electrical Safety - DeWalt DC019 Traducido De Las Instrucciones Originales

Ensure correct bulb is used.
Do not use near fire.
Do not plug cord in.
Correct bulb placement.
Battery clamp down.
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery!
Example:
2010 XX XX
Year of Manufacture

Package Contents

The package contains:
1 Worklight
1 Instruction manual
1 Exploded drawing
• Check for damage to the worklight, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
The DC019 and DC020 worklights are designed to
use as a light source.
The DC019 and DC020 worklights are professional
appliances. DO NOT let children come into
contact with the tool. Supervision is required when
inexperienced operators use this tool.
a. ON/OFF switch
b. Handle
c. Battery port
d. 16 Amp outlets (DC020 QW, 230 V only)
13 Amp outlets (DC020 GB, 230 V only)
e. Power cord
f. Built-in cord wrap
g. Battery hold-down
h. Fluorescent bulb
i. Lens cover
j. Worklight housing
k. Support arm
l. Rubber gasket
m. Bulb guard

Electrical Safety

The electrical product has been designed for one
voltage only. Always check that the power supply
corresponds to the voltage on the rating plate.
DC020 LX; DC019
Your tool is double insulated in
accordance with EN 60598.
DC020 BD, QW and GB are grounded (class I)
according to EN 60335 and EN 60598.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in
the plug.
• Connect the blue lead to the neutral terminal.
WARNING: No connection is to be
made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs. Recommended fuse: 3 A.
Fitting a Mains Plug to 115 V Units
(U.K. and Ireland only)
• The plug should be fitted by a competent
person. If you are in doubt, contact an
authorized D WALT repair agent or a qualified
E
electrician.
• The wires are coloured according to the
following code:
live = brown
neutral = blue
• Do not connect the blue or brown wire to the
earth terminal in the plug. Connect as follows:
brown to terminal marked 'L'
blue to terminal marked 'N'
EN GL IS H
27