Programming Mode - LG RV1329C1T El Manual Del Propietario

PROGRAMMING MODE

You can check machine information or change setting on Program setup or Diagnostic test.
There are two methods that you can enter programming mode.
how to enter Programming mode:
- Coin type – Turn on/off the toggle switch.
- Card type – Insert the service card.
- All types –
1) Press the 1st & 3rd button at the same time.
2) Press the 2nd & 3rd buttons to toggle numbers.
Then, press the 4th button to move to the next digit.
3) Press the Start button to finish password input.
※ Default Password : 3000
Coin Box Key
Coin Vault
Coin type
NOTE
• If you turn on the power without connecting the meter case for the first time, the machine will display
• W hen the machine comes from the factory, it is set in the coin type. You can change Card/Coin type by button.
(For more information refer to SETUP mode's
• The machine will display "PUSH" for OPL type
• Price setting varies by country.
• Set your country from
• After EEPT, reset your country. (Default country is England)
Insert debit card
Card type
.)
mode. (Refer How to enter the
PROGRAmmING mODE
<Control Panel >
1st
2nd
3rd
4th
Start
OPL type
)
21 EN
.