Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Button LED keep ON during operation.
• Button LED flash after program completed.
Recipes
Hot pepper
Dried anchovy
Rice
Recommendations :
• Manual stop the operation by pressing the On/Off button during auto
grinding if the ingredients are well ground.
• Grinding result may be affected by the shape and size of ingredients,
recommend to cut the ingredients into smaller pieces for better result or
adjust the ingredients quantity.
• Do not grind very hard ingredients.
CLEANING YOUR APPLIANCE
• Never immerse the motor unit (B) in water and never place it under
running water.
• Unplug the appliance and remove the blender jar, on-the-go bottle or
grinder cup with blade from the motor unit.
• To make it easy to clean the blender jar, unlock the blade by turning it
clockwise and clean the blade using running water.
• To detach the seal for On-the-go (D3) or Grinder (E2), turn the blade
unit upside down and press the toothpick into the small hole on the
underside of the blade unit (Fig. 1). After cleaning, put the seal in the
slot on the blade unit. Make sure that the seal forms a tight seal around
the base of the blade unit by pressing it down.
• Handle them with care: the blades of the blender, on-the-go and
grinder are sharp.
• Rinse the blender jar, on-the-go bottle or grinder cup and its lid under
running water.
• Clean the motor unit (B) with a damp cloth. Dry it carefully.
• To make cleaning easier, wash all removable parts with water and a little
washing-up liquid immediately after use.
• After cleaning, remember to correctly fit the seal (A4) back onto the
blade unit (A5, A6). Be careful to avoid any damage to the seal by the
blades cutting it.
Ingredients (Max)
20g
45g
80g
Recommended time
30 sec
40 sec
30 sec
EN
27
Tabla de contenido
