Cleaning Your Appliance - TEFAL BL841138 Manual Del Usuario

• All the settings on the control panel will flash.
USING THE SETTINGS
• Choose your preferred setting by pressing the corresponding button
setting will flash.
• Press the start button to start the programme. The appliance will beep, and the start button
and chosen setting will stay lit up until the programme has finished
• Once the programme has finished, the appliance will beep again. After settings P1, P2 and
P3, the appliance will automatically switch to keep-warm mode for 40 minutes and the
button will light up
Note: You can stop the programme at any time by pressing the start/stop button again.
If a soup-making cycle is interrupted by pressing the start/stop button or by opening the
motor unit, preparation should be restarted and you should wait 20 mins for the appliance
to cool down, before restarting the programme.
• Unplug the cord from the mains socket, and then remove the jug.
• Hold the side handle of the jug with one hand and remove the motor unit by pulling up the
top handle with the other hand
• You can now pour the soup, smoothie or compote into a container.
Tip: For a smoother soup, you can then press the blend setting (P5) to give it a creamy
texture.
To familiarise yourself with the appliance, we suggest you try out one of the recipes from the
recipe booklet.

CLEANING YOUR APPLIANCE

• Before first use or to clean the appliance as indicated below:
– Open the appliance
MAX level) (fig
– Put the top back on
– Press the P4 Easy cleaning button
– When you hear the beep indicating the programme has finished, open the appliance
empty the water and rinse inside the jug
• Do not immerse the appliance in water. Do not place the motor unit
running water.
• If necessary, once the appliance has cooled down, wash the blade under the tap
finish by cleaning the inside of the jug and the motor unit with a damp sponge.
• If there are still stains on the inside of the jug, leave it to soak for a few hours in hot soapy
water, then remove the residue with a plastic scourer.
• Rinse the bowl.
• Be careful when you remove the motor unit
extremely sharp.
• To clean the outside of the motor unit
carefully.
• Do not put washing-up liquid in the jug while the easy-cleaning programme is running (risk
of overflowing during the cleaning cycle).
• The appliance is not designed to be cleaned in a dishwasher.
142
(fig 9).
(fig 1).
(fig 1) and fill the jug with 1.2 L of hot water from the tap (up to the
3). Do not add washing-up liquid to the jug.
(fig 5) and plug it in
(fig
(B)
(fig 6).
10).
(fig 11).
(B) and when cleaning the blade, which is
and the walls of the jug (I), use a damp cloth. Dry
(fig 7). Only the chosen
(fig 8).
(fig 1),
(B) or the jug (I) under
(fig 12) and