Specifications
Speakers (SS-TSB101)
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Surround amplifier
(TA-SA200WR)
Amplifier Section
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(FTC)
for the US model
U.S. models:
POWER OUTPUT (reference):
Other models:
POWER OUTPUT (rated):
POWER OUTPUT (reference):
Rated impedance
Full range Bass
reflex
55 mm × 80 mm
1
1
(2
/
in × 3
/
in)
4
4
cone type
3 ohms
75 mm × 225 mm ×
7
71 mm (3 in × 8
/
8
7
in × 2
/
in) (w/h/
8
d)
0.45 kg (1 lb)
With 3 ohm loads,
both channels
driven, from 120 -
20,000 Hz; rated 45
watts per channel
minimum RMS
power, with no
more than 1% total
harmonic
distortion from 250
milli watts to rated
output.
167 W (per channel
at 3 ohms, 1 kHz)
80 W + 80 W (at 3
ohms, 1 kHz, 1%
THD)
167 W (per channel
at 3 ohms, 1 kHz)
3 - 16 Ω
General
Power requirements
North American models: 120 V AC, 60 Hz
Other models:
Power consumption
Standby power consumption
North American models: 0.9 W (standby
Other models:
Dimensions (approx.)
Mass (approx.)
Wireless transceiver
(EZW-RT10/EZW-RT10A
* North American and European models only.
Communication system
Frequency band
Modulation method
Power requirements
Dimensions (approx.)
Mass (approx.)
Design and specifications are subject to change
without notice.
"S-AIR" and its logo are trademarks of Sony
Corporation.
• Standby power consumption 0.13 W (North
American models), 0.18 W (other models)
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-master.
220 V - 240 V AC,
50/60 Hz
50 W
mode)
0.13 W (turned off)
1.0 W (standby
mode)
0.18 W (turned off)
206 mm × 60 mm ×
1
256 mm (8
/
in ×
8
3
1
2
/
in × 10
/
in)
8
8
(w/h/d) with the
wireless
transceiver inserted
1.3 kg (2 lb 14 oz)
)
*
S-AIR
Specification
version 1.0
2.4000 GHz -
2.4835 GHz
DSSS
DC 3.3 V, 350 mA
50 mm × 13 mm ×
17
60 mm (2 in ×
/
32
3
in × 2
/
in) (w/h/
8
d)
24 g (1 oz)
13
GB