Echo 99944200250 Instrucciones

Tools Required: Head locking tool - 1/8 in. dia. Rod
Parts Required: ECHO 0.105 in. Nylon Trimmer Line 15m (50 feet) long
CAUTION
Wear Gloves or personal injury may result:
• Cutoff knife is sharp.
• Gearcase and surrounding area may be hot.
REMOVE NYLON LINE HEAD
NOTE
Do not disassemble nylon line head.
1. Align locking hole in upper plate with notch in edge of gear housing
and insert head locking tool (A).
2. Remove line head (B) by turning it clockwise until head is completely
off of shaft.
NYLON LINE HEAD INSTALLATION
1. Be sure adapter plate (C) remains on PTO shaft.
2. Align locking hole in upper plate with notch in edge of gear housing
and insert head locking tool (A).
3. Thread line head (B) onto shaft by turning it counter-clockwise until
head is tight against adapter plate (C).
4. Remove locking tool (A).
TO ADVANCE TRIMMER LINE
Tip:
To advance trimmer line, tap trimmer head against the ground
while the head is turning at normal operating speed.
99922200592
07/08
99944200250
NYLON LINE HEAD INSTRUCTIONS
A
B
A
C
A
B