Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. Maintenance and servicing
Important: The pallet truck must only be serviced by authorized staff
Hydraulic oil
The total capacity of the oil tank is approx. 0.3l. The oil level must be checked at intervals of 6 months. It is at the
optimum level when with forks lowered there is 5 mm of air between the surface of the oil and the lid of the oil tank.
To fill up use an oil according to the following data:
Temperature
-20℃ - +40℃
Removing air bubbles in the hydraulic system
Changing the seals can lead to air bubbles in the hydraulic system. To remove these, put the switch handle (H106)
in the LOWER position and then move the tow handle several times up and down.
Moving parts
The moving components of the pallet truck must be checked regularly for ease of movement and if required
relubricated with commercially-available lubricating grease.
In the event of damage or particular incidents that can influence the bearing capacity, the device is to be subjected
to a test by a qualified person.
8. Declaration of conformity
Herewith we, the DENIOS AG, Dehmer Straße 58-66, D 32549 Bad Oeynhausen, declare that the product
complies with following guidelines.
Hydraulic pallet truck HW / HWD
Type:
Safe working load:
EC Directives
Machinery directive 2006/42/EC
Harmonised standards applied
EN 1494
DIN EN 1757
EN 349
EN ISO 14121
EN 12100 -1,-2
EN 13857
Person responsible for documentation
Mr. Dr. Ing. R. Adenstedt
Head of engineering
Gabelhubwagen HW/HWD
128380;164485
Oil
Hydraulic oil according to ISO VG 46
EC Declaration of Conformity
Seite 19 von 35 Seiten
2000 kg
DENIOS AG, 04.01.2010
Theodor Breucker
- Board of governors -
Ausgabe 09/2011
Tabla de contenido
