Denios HW / HWD Manual De Instrucciones página 17

6.2 Using the printer (for HWD model only)
Printouts
The letters "B/G" indicate the weight measured; the letters "TOT" indicate total weight.
Example of a printout (as in 6.1.2):
01 B/G
02 B/G
02 TOT
Out*: The reference "Out" on the printout shows the weight of the pallet
Switch
Paper feed
(no function)
The LED lights up for a short time after each printout.
The paper feed will only work if the LED is lit.
Changing the printer paper
Switch the weighing system off.
-
Push carefully on the lever to open the cover.
-
Put the new roll of paper in, the free end must be at the top facing forward in the printer.
-
Close the cover. Hold the end of the roll of paper tightly so that it can be seen when the printer is closed.
-
Tear off the overhanging end of the roll of paper on the tear bar.
-
Gabelhubwagen HW/HWD
128380;164485
40 kg Out*
158,2 kg
198,2 kg
Tear bar
Paper out
Cover
Lever
Seite 17 von 35 Seiten
LED
Flashes three times
Flashes four times
Continuous light
Paper finished
Under/overvoltage
Printer receiving data, printing readout
Ausgabe 09/2011