Operating The Scales - Denios HW / HWD Manual De Instrucciones

Raising the forks
- Lever in lifting position
- By up and down pumping movements with the tow handle the load can be lifted to the desired height
Lowering the forks
- Lever in lowering position
- The forks lower slowly
Moving the load
- Lever in neutral position
When moving the load the forks must be only slightly raised

6.1 Operating the scales

The scales and printer are powered by four AA batteries, which are included in the delivery.
To replace or insert the AA batteries, you must first unfasten the two screws on
the battery cover.
Lower the lifting forks.
Switch on the scales by pressing the
If this is not the case, the "0" reading must be reset.
To do so, press the →0← key for 8 sec. The reading on the display will count down from AF 08 to AF 00.
A percentage will briefly appear on the display to indicate the accuracy rate for the new "0" setting.
Gabelhubwagen HW/HWD
128380;164485
.Ф..
key. "0,0" should appear on the screen
Seite 14 von 35 Seiten Ausgabe 09/2011