Denios HW / HWD Manual De Instrucciones página 15

6.1.1 Measuring gross weight
Press the →0← key (deletes tare weight)
1)
2) Pick up load, raise forks
3) Press Σ....key once for a long time (3 sec) and then
immediately press again briefly
4) Lower forks, remove load
6.1.2 Measuring net and gross weight
Press the →0← key (deletes tare weight)
1)
2) Pick up empty pallet, raise forks
Press the →0← key
3)
4) Lower forks
5)
Press the Σ ..key
6) Pick up loaded pallet, raise forks
7) Press the Σ ..key
8) Press the Σ ..key for a long time (3 sec)
9)
Press the Σ ..key for a long time (3 sec) and
then immediately press once again briefly (while the total
is on the display)
6.1.3 Measuring net weight
Press the →0← key (deletes tare weight)
1)
2) Pick up empty pallet, raise forks
Press the →0← key
3)
4) Lower forks
5) Pick up loaded pallet, raise forks
6)
Press the Σ ..key
7) Press the Σ ..key once for a long time (3 sec) and
then immediately press once again briefly
Gabelhubwagen HW/HWD
128380;164485
- Display = 0,0
- Display = Gross weight
- Weighing procedure completed;
printed out on HWD model
- Display = 0,0
- Display = Weight of pallet (e. g. 40 kg)
- Display = 0
- Display = -40kg
- Tare weight recorded and printed out
(on HWD model)
- Display = Net weight
- Weight recorded and printed out
(on HWD model)
- Total tare and net weight added together is
displayed
- Weighing procedure completed and printed out
(on HWD model))
- Display = 0,0
- Display = Weight of pallet (e. g. 40 kg)
- Display = 0
- Display = -40kg
- Display = Net weight
- Weight recorded and printed out
(on HWD)
- Weighing procedure completed and printed out
(on HWD)
Seite 15 von 35 Seiten Ausgabe 09/2011