Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. SAFETY INSTRUCTIONS
For your own safety, please read this user manual
carefully before your initial start-up.
Caution
Keep this equipment away from
rain, moisture and liquids.
Every person involved with installation, operation &
maintenance of this equipment should:
•
Be competent
•
Follow the instructions of this manual
Caution
Take care using this equipment.
High voltage-risk of electric shock.
Before your initial start-up, please make sure that
there ir no damage caused during transportation.
Should there be any, consult your dealer and do
not use the equipment. To maintain the equipment
in good working condition and to ensure safe
operation, it is necessary for the user to follow the
safety instructions and warning notes written in
this manual.
Please note that damages caused by user
modifications to this equipment are not subject to
warranty.
Important: The manufacturer will not accept liability
for any resulting damages caused by the non-
observance os this manual or any unatu horized
modification to the equipment.
•
Never let the power-cable come into contact
with other cables. Handle the power-cable and
all mains voltage connections with particular
caution.
•
Never remove warning or informative labels
from the equipment.
•
Do not open the equipment and do not
modify the equipment.
•
Do not connect this equipment to a dimmer-
pack.
•
Do not switch the equipment on and off in
short intervals, as this will reduce the systems
life.
•
Only use the equipment indoors.
•
Do not expose to flammable sources, liquids
or gases.
•
Always disconnect the power from the mains
when equipment is not in use of before
cleaning. Only handle the power-cable by the
plug. Never pull out the plug by pulling the
power-cable.
•
Make sure that the available voltages is 110-
240v.
•
Make sure that the power-cable is never
crimped or damaged. Check the equipment
and the power-cable periodically.
•
If the equipment is dropped or damaged,
disconnect the mains power supply
immediately. Have a qualified engineer
inspect the equipment before operating
again.
•
If the equipment has been exposed to
drasctic temperature fluctuation (e.g.
after transportation), do not switch it on
immediately. The arising condensation might
damage the equipment. Leave the equipment
switched off until it has reached room
temperature. Only use fuses of same type and
rating.
•
Repairs, servicing and power connection must
inly be carried out by a qualified technician.
This unit contains no user serviciable parts.
P. 3
| Tecshow Derby Lite
English version
Tabla de contenido
