Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. SAFETY INSTRUCTIONS
Warning Please read the instruction carefully
which includes important information about the
installation, usage and maintenance.
•
Please keep this User Manual for future con-
sultation. If you sell the unit to another user,
be sure that they also receive this instruction
booklet.
•
Unpack and check carefully there is no trans-
portation damage before using the unit.
•
Before operating, ensure that the voltage and
frequency of power supply match the power
requirements of the unit.
•
It's important to ground the yellow/green con-
ductor to earth in order to avoid electric shock.
•
The unit is for indoor use only. Use only in a dry
location.
•
The unit must be installed in a location with ad-
equate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are
blocked.
•
Disconnect main power before replacement or
servicing.
•
Make sure there are no flammable materials
close to the unit while operating as it is fire
hazard.
•
Use safety cables when fixing this unit. DO NOT
handle the unit by its head only, always carry by
its base.
•
Maximum ambient temperature is Ta: 40 de-
grees C. DO NOT operate it where the tempera-
ture is higher than this.
•
Unit surface temperature may reach up to 75
degrees C. DO NOT touch the housing with
bare-hands during its operation. Turn off the
power and allow about 15 minutes for the unit
to cool down before replacing or serving.
•
In the event of a serious operating problem,
stop using the unit immediately. Never try to
repair the unit by yourself. Repairs carried out
by unskilled people can lead to damage or mal-
function. Please contact the nearest authorized
technical assistance center. Always use the
same type spare parts.
•
Do not touch any wire during operation as high
voltage may cause electric shock.
Warning
•
To prevent or reduce the risk of electrical shock
or fire, do not expose the unit to rain or moisture.
•
The housing and lenses must be replaced if
they are visibly damaged.
Caution
There are no user serviceable parts inside the unit.
Do not open the housing or attempt any repairs
yourself. In the unlikely event your unit may require
service, please contact your nearest dealer.
Installation
The fixture should be mounted via its Omega Quick
Release Clamp bracket. Always ensure that the
unit is firmly fixed to avoid vibration and slipping
while operating and make sure that the structure
to which you are attaching the unit is secure and is
able to support a weight of 10 times of the fixtures
weight. Always use a safety cable that can hold 12
times of the weight of the fixture when installing.
The equipment must be installed by professionals.
It must be installed in a place where is out of the
reach of people and no one can pass by or under it.
P. 3
English version
- Tecshow Halo 740 XL
Tabla de contenido
