Stanley FATMAX SFMCE530 Traducido De Las Instrucciones Originales página 12

ENGLISH
Note: Splinters and small particles of stripped paint
can be ignited and blown through holes and cracks in the
surface being stripped.
Accessories
Warning! Since accessories, other than those offered by
STANLEY FATMAX, have not been tested with this product,
use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only STANLEY FATMAX
recommended accessories should be used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
This tool is supplied with a set of accessories for different
applications.
Reflector nozzle or hook nozzle (8) (Fig. H)
Heat shrink sleeve, reflecting heat around item. Avoids excess
heat, burning or damaging surface behind workpiece.
75mm fish tail surface nozzle (9) (Fig. I)
Drying, removing paint, removing vinyl or linoleum, thawing
(heat spread over wide area).
Maintenance
Your STANLEY FATMAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
12
(Original instructions)
Technical data
Voltage
Power input
Temperature range
Weight
This tool is a Bare unit but can be used with the chargers in
the following table.
Charger
Input Voltage
Output Voltage
Current
This tool is a Bare unit but can be used with the batteries in
the following table.
Battery SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage V 18
DC
Capacity Ah 1.5
Type Li-Ion
Approx. min. 22
Charge time
Warning! Your STANLEY FATMAX charger can only be used
to charge STANLEY FATMAX, Li-Ion batteries.
Guarantee
STANLEY FATMAX is confident of the quality of its products
and offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with STANLEY FATMAX Terms and Conditions and you will
need to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the STANLEY FATMAX
1 year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
com, or by contacting your local STANLEY FATMAX office at
the address indicated in this manual.
Please visit our website www.stanley.eu/3 to register
your new STANLEY FATMAX product and receive updates on
new products and special offers.
SFMCE530 typ. 1
V
DC
W
ºC
Kg
SFMCB14** typ. 1
V
AC
V
DC
A
18 18
2.0 4.0
Li-Ion Li-Ion
30 60
18
360
510
0.53
230
18
4
18
6.0
Li-Ion
90