Commissioning; Alignment; Check The Application Conditions - SICK GRL18V Instrucciones De Operación

7

COMMISSIONING

7 Commissioning
7.1

Alignment

7.2

Check the application conditions

8
Align the sensor with a suitable reflector. Select the position so that the red emitted
light beam hits the center of the reflector. The sensor must have a clear view of the
reflector, with no object in the path of the beam
optical openings of the sensor and reflector are completely clear.
Figure 2: Alignment
Adjust the distance between the sensor and the reflector according to the correspond‐
ing diagram [ see figure 3] (x = sensing range, y = operating reserve).
Operating reserve
y
100
10
6
5
1
0 1 2 3
(3.28) (6.56) (9.84)
Figure 3: Characteristics
After alignment is complete, move a non-transparent object into the path of the
beam. Use and see table 2, page 7
fails to behave in accordance with the table, check the application conditions,
„Troubleshooting table", page
[see figure
3 1
2 4
4 5 6 7
(13.12) (16.40) (19.69) (22.97) (26.25)
Distance in m (feet)
to check the function. If the switching output
9.
2]. You must ensure that the
x
8
see
8021183.1ABM / 2020-12-21 | SICK
Subject to change without notice