Firewire Interface - Phonic HELIX BOARD 18 FIREWIRE MKII Manual Del Usuario

FireWire Interface

System Requirements
The following are the minimum required specifications for use with the Helix Board 18 FireWire MKII mixer. If your computer does not meet
these requirements, you will experience lagging of audio and possible freezing of your computer when attempting to operate the mixer.
Windows
• Microsoft® Windows® XP SP1 and SP2
• Available FireWire port (suggested FireWire Interface: ADS Pyro 64 FireWire card with TI chip)
• Intel Pentium® 4 processor or equivalent AMD Athlon processor
• Motherboard with Intel or VIA chipset
• 5400 RPM or faster hard disk drive (7200 RPM or faster with 8 MB cache recommended)
• 256 MB or more of RAM (512 MB recommended)
Macintosh
• OS X 10..5 or later with native FireWire support
• G4 or newer processor
• 256 MB or more of RAM
Driver Installation
To use the Helix Board FireWire mixer efficiently (or at all) on a PC, it is important to install all the necessary drivers from the included CD
(ASIO and WDM drivers). It is important that users read all instructions carefully before continuing on to the each step of installation, as
users will be required to unplug and plug in their FireWire device. This is not necessary for Mac users.
Windows XP (with Service Pack 1 or 2)
1. It is recommended that you quit all applications before starting the installation process.
2. Ensure the Helix Board FireWire is not yet connected to your Computer's FireWire input.
3. Insert the installation CD included with your Helix Board FireWire mixer into the CD-ROM drive of your computer. If the CD does not
automatically start the installation process within a few moments, then navigate to "My Computer" g your CD-ROM drive g "Drivers
and Control Panel" g double-click "setup.exe" to begin the installation manually. The Helix Board FireWire Control Panel software also
will be installed at this time.
4. Follow the installation instructions.
Helix Board 18 FireWire MKII is not connected to your PC, then click "Next".
HELIX BOARD 18 FIREWIRE MKII
Make sure no other programs are running on your PC and that the
9