Listening To Records - Roadstar HIF-1580BT Manual De Instrucciones

If your MP3 CD/USB/SD has more than 1 folder, press FOLDER BUTTON (12) to

select the desired folder.
Press PLAY/PAUSE BUTTON (16) to pause the playback. The track number will

start blinking.
Press PLAY/PAUSE BUTTON (16) again to resume the playback.

Press STOP BUTTON (15) to stop the playback.

REPEAT MODE
During playback, repeatedly press REPEAT BUTTON (9) to select:
Repeat1: The current track is played repeatedly. 
RepeatFolder: The current folder is played repeatedly.

RepeatAll: All tracks are played repeatedly.

CD PROGRAMMING
You can program up to 20 tracks to play in any desired order.
1. Insert a disc and press STOP BUTTON (15) when it starts playing.
2. Press PROGRAM BUTTON (8). "P01" will be shown on the display.
3. Press SKIP -/+ (13)/(14) to select your favorite tunes.
4. Press PROGRAM BUTTON (8) to store the track in the program memory. "P02"
will be shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE BUTTON (16) to start program play.
7. Press STOP BUTTON (15) once to stop the program play. Press STOP BUTTON
(15) twice to clear programme.

LISTENING TO RECORDS

1. Select AUX/PH mode using FUNCTION SELECTOR (17).
2. Open the Record Player Cover. Release the Tonearm Clamp, and remove the
stylus protector. Place a record on the turntable, over the central spindle. Place
the EP adapter over the central spindle when playing 17cm EP records.
3. Set 33/45/78 RPM SPEED SELECTOR (3) to 33 / 45 / 78 rpm according to the
record.
4. Lift the Tonearm with the Tonearm Lift Lever. Move the tonearm to the beginning
of the record, or to the start of a particular track. Gently lower the tone arm onto
the record with the Tonearm Lift lever to start playing.
5. To select autostop mode, move AUTOSTOP SWITCH (4) to ON position. When
the record is finished the tonearm will automatically stop. To stop manually, lift the
tonearm from the record and return it to the rest.
6. Moving or jarring the turntable without securing the Tonearm clamp could result in
damage to the Tonearm. Replace the protective cap on the stylus when not in use.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device
like MP3 players, CD players and allow playback of your external source through the
system speakers.
1. Use an audio cable (not included) with 3.5 mm stereo plugs on each end of the
cable. Plug one end into the AUX-IN jack on the main unit and plug the other end
English 2