Tabla de contenido
SAFETY INSTRUCTIONS
© Stanley Bostitch
IMPORTANT READ CAREFULLY: It is important that all operators read and understand all sections of
this Tool Technical Data manual and the separate Safety and Operating Instruction Manual which come
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
with this tool. Failure to do so could result in you or others in the working area to be seriously injured.
compliance for the products.
WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined in
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
EN166 should be used. However all aspects of operators work, environment and other type/s of machinery
being used, should also be considered when selecting any personal protection equipment. Note: Non-side
rien que les produits soient conformes aux normes CE.
shielded spectacles and face shields alone do not provide adequate protection.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
WARNING! To prevent accidental injuries:
die CE-Richtlinien für Produkte.
•
Never place a hand or any other part of the body in fastener discharge area of tool.
•
Never point tool at yourself or anyone whether it contains fasteners or not.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
•
Never engage in horseplay.
•
zeggen dat de producten voldoen aan de CE-vereisten.
Never pull the trigger unless the nose is directed towards the work.
•
Always handle the tool with care.
•
Do not pull the trigger or depress the trip mechanism whilst loading the tool.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
•
To prevent accidental actuation and possible injury, always disconnect air supply.
produkterne.
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use.
5. When moving to a different work area, as accidental actuation may occur, possibly causing injury.
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
•
Read the additional Safety & Operating instructions booklet before using tool.
yhdenmukaisuutta.
•
Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
•
The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
LOADING THE TOOL
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
1. Depress magazine release button and pull back magazine. (Fig. 1)
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
2. With magazine fully open, insert fasteners. Points must be against bottom of magazine. (Fig. 2)
conformità CE per i relativi prodotti.
3. Push magazine forward. Continue pushing until latch is engaged. (Fig. 3)
Note: Use only fasteners recommended by Stanley for use in Stanley Tools or which meet Stanley
specifications.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
merking for produktet.
Important Note: Steel fasteners are made from galvanized steel wire and are not treated after they are
manufactured. As such, we do not guarantee or warranty product against corrosion for any specified time.
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
conformidade com a CE para os produtos.
"DIAL-A-DEPTH™" FASTENER CONTROL ADJUSTMENT (Fig. 4)
The DIAL-A-DEPTH™ Fastener Control adjustment feature provides close control of the fastener drive depth;
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
from flush with the work surface to shallow or deep countersink. First, set the air pressure for consistent drive in
conformidad con las normas CE de los productos.
the specific work, then use the DIAL-A-DEPTH™ Fastener Control adjustment to give the desired depth of drive.
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
ADJUSTING THE MULTI-DIRECTIONAL EXHAUST
conformidad con las normas CE de los productos.
To adjust the multi-directional exhaust, simply rotate the exhaust deflector in a desired position as illustrated:
arrows. (Fig. 5)
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
stanowią deklaracji zgodności CE prezentowanych produktów.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
a termék CE-megfelelőségét.
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
conformitatea CE pentru produse.
GB
Tabla de contenido
