MTD 19A30019OEM Manual Del Usuario página 5

OPERATION
1. Move the lift lever backward to lower the sleeve hitch.
2. Attach an implement using the sleeve hitch pin. Tighten
the stabilizer bolts against the implement hitch and then
tighten the jam nuts.
IMPORTANT: Some implements may require that the
stabilizer bolts not be tightened. Refer to your implement
owner's manual.
3. If the implement attached to the sleeve hitch is not level
front to back during operation, move the clevis pin in the
lifting link to a hole that gives better levelling (3 holes
available).
4. To tow an implement that has a tow hitch, simply remove
the three clevis pins and then remove the Sleeve Hitch
Lift Assembly from the Sleeve Hitch Frame Assembly.
MAINTENANCE
1. Clean off after each use.
2. Oil pivot points as needed.
3. Store in a dry location.
5