Cleaning And Maintenance - Grizzly BLS 30 Traducción Del Manual De Instrucciones Original

• Direct the airstream away from your-
self. Ensure that you do not to stir up
any heavy objects and hurt somebody
or damage something.
• Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
• Before blowing, loosen leaves adher-
ing to the ground with a broom or
rake.
• The guide rollers at the end of the
tube make it easier to work on flat sur-
faces.
C
Suction operating mode:
• Set the operating mode selector
switch to the symbol
whether the collection bag (12) is cor-
rectly assembled.
• Make sure the volumes of leaf mate-
rial sucked in at one time are not too
large. This will avoid clogging of the
blower / suction tube and blockage of
the impeller wheel.
• For ground suction of leaves or leaf
residues, place the enclosed flat noz-
zle onto the end of the tube.
The ejection nozzle ensures ideal
transport of leaves into the leaf bag.
Additionally, it serves your safety by
preventing contact with the fan during
operation.
To reduce wear on the collec-
tion bag, do not drag it along the
ground while working.
If the device stops suddenly dur-
ing operation and does not pro-
duce any suction, then it is to be
Emptying the collection bag:
With full collection bag, the suction pump-
ing capacity decreases considerably and
the collection bag must be emptied when
the bag is full or interferes with the suction
capacity of the device.
. Check
1. Wait until the impeller wheel comes to
2. To remove the collection bag, remove
3. Open the zip-fastener on the collec-
4. Mount the emptied collection bag

Cleaning and maintenance

switched off immediately. Make
sure that no material is wedged in
between the shredder impeller and
the casing. Carry out the work as
described in the chapter "Cleaning
and Maintenance". If the appliance
will not start, consult our Service
Centre.
Disconnect the spark plug terminal
before carrying out any work on
the equipment.
a standstill.
the retainer loop and press the cou-
pler lever on the frame.
tion bag and empty it completely.
again.
Composting material does not be-
long with domestic waste!
Disconnect the spark plug terminal
before carrying out any work on
the equipment.
Leave all work not described in
this manual to our Service Cen-
tre. Only use original parts.
GB
89