Guarantee - Grammer PRIMO M Manual De Instrucciones

Safety instructions
Before the vehicle is used, switches that might be in the driver's seat (for shutting down
mechanical equipment when the driver leaves his/her seat) must be checked for proper
function.
If malfunctions are detected, the vehicle must not be driven.
– INCREASED RISK OF ACCIDENT –
Loads must not be placed on seats with a built-in switch, except for the driver's
weight during normal use, as the vehicle may otherwise start to move by itself.
¡ £ ¢ ¥ ¤ § ¦ © ¨ £  § ¦    ¤ §  §       ¨ ¢ § ¢ ¥  § ¦  ¡  !
–
If you take off the weight from the seat while driving, this will cause the vehicle to stop.
Do not indent the bellows while there is load on the driver's seat.
– RISK OF CRUSHING –
Make sure that the interior of the driver's seat remains free of foreign particles or
liquids.
The driver's seat is not watertight and must be protected against splashes of water!
Any conversion or refitting work on a GRAMMER driver's seat must be performed
exclusively in authorized workshops by trained or suitably qualified personnel and in
adherence with the applicable operating, maintenance and installation instructions and in
compliance with all relevant national regulations.
Improper installation and assembly bear the risk of personal injury or property
damage and the proper function of the driver's seat or mounted parts can no longer be
guaranteed.

Guarantee

GRAMMER can provide no guarantee for damage resulting from incorrect assembly, use
or repair of the driver's seats.
Further details on the guarantee granted by GRAMMER are stated on the invoice or the
delivery note. Warranty claims against GRAMMER beyond the guarantee obligations
described there are excluded.
20
–
GB