Blendtec STEALTH Manual Del Usuario página 13

Permanently change cycle buttons
To permanently change the cycle buttons in a profile, export
the revised profile to a USB drive and import the profile on the
blender. Or, using Blend Wizard (my.blendtec.com), edit the
profile, then export the profile to the blender.
3.2.7 BLEND WIZARD
In addition to using the profiles and cycles preprogrammed on
the blender, Blend Wizard can be used to create custom profiles
and cycles. For instructions on using Blend Wizard to easily
develop custom profiles and cycles, visit my.blendtec.com.
3.2.8 BLENDER STATISTICS
Blend cycle counts
To review the total number of cycles run and the number of cycles
run for each button:
1. Press and for 1 second to enter the menu.
2. Press to scroll down to Cycle Counts. Press
3. Press to scroll through cycle counts.
4. Press to exit the menu.
Note: The pulse count refers to pulse sets. For example, touching the
pulse button 5 times in a row will register as 1 pulse count. Touching
the pulse button, then a cycle number and then the pulse button will
register as 2 pulse counts.
Diagnostic error log
To review the diagnostic errors that have been logged on the blender:
1. Press and for one second to enter the menu.
2. Press to scroll down to Diagnostic Counts; press
to select.
3. Press to scroll to see the number of errors in each category.
4. Press to exit the menu.
Exporting blender statistics
Exporting blender statistics (cycle counts, errors, settings and
firmware versions is a way to save diagnostic information,
which Blendtec's customer service and repair experts will use if
problems arise with the blender. To export blender statistics to a
USB drive, complete the following steps:
1. Locate the USB port on the bottom of metal motor housing on
the blender.
2. Plug the USB drive into the blender's USB port.
Note: If the blender is in manual or automatic operation mode,
the USB drive menu will automatically load on the screen. If the
blender is in programming mode, go to the main menu and select
USB Drive.
3. Press
again to confirm export of counts to the ICBUCNTS.CSV file or
press
4. After the export process is finished, remove the USB drive
to select.
from the blender
Exporting and transferring profiles
For more information on exporting and transferring information
and BlendWizard please see my.blendtec.com
• For all Connoisseur models, the USB port is located on the
bottom of the metal motor housing. Connoisseur 825 above
counter models will need the plastic plate removed to access the
USB port.
to scroll to Export Counts. Press
to cancel and return to the previous menu.
to select. Press
11