Blendtec STEALTH Manual Del Usuario página 10

Exporting blender statistics
Exporting blender statistics (cycle counts, errors, settings and
firmware versions is a way to save diagnostic information,
which Blendtec's customer service and repair experts will use if
problems arise with the unit.
To export blender statistics to a USB drive, complete the
following steps:
1. Use a #1 Phillips screwdriver to remove the USB cover at the
top of the right side of the blender.
2. Plug the USB drive into the blender's USB port.
Note: If the blender is in manual or automatic operation mode, the
USB flash drive menu will automatically load on the screen. If the
blender is in programming mode, go to the main menu and select
USB Drive.
3. Press the to Export Counts. Press
again to confirm export of counts to the sth-cnts.csv file.
4. After the export process is finished, remove the USB drive
from the blender and secure the cover on the USB port with
a #1 Phillips screwdriver.
8
to select. Press