Idiomas disponibles
Idiomas disponibles
controlled altogether. If you press a key
once according to these instructions you
can enter a device code for the first
assignment or control the first device. If
you press a device key twice within 2
seconds you can set the key for a
second device, or control a second
device via the key.
Code search
To control e.g. a TV:
1.
Switch on a program on your TV
(on the TV itself or with the original
remote control).
2.
Press the SET button, hold it down
and at the same time press a
device button, e.g. TV*) until the
selected
device
indication
displayed and the CODE NO. is
blinking.
3.
Then press the SET button again
briefly.
4.
Press the PWR button approx.
every 2 seconds.
5.
When the TV switches itself off,
briefly press the device button
(TV*)) to store the code found.
6.
The blinking stops and the search
is ended.
7.
Try out the functions. If everything
is okay, you can set the remote
control as described in steps 1 to
6 for other devices. If it is not
okay,
continue
searching
described in 1 to 6.
Automatic code search
To control e.g. a TV:
1.
Switch on a program on your TV
(on the TV itself or with the original
remote control).
2.
Press the device button with which
you want to control a device, e.g.
TV*).
3.
Then press the SET button for
approx. 5 seconds until CODE
NO. starts blinking.
4.
Release the SET button and point
the UR at the device to be
controlled. The UR .then begins to
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Fax: +49(0)4102 31444,
E-Mail:
emit a test signal about every 2
seconds.
5.
When the TV switches itself off,
briefly press the SET button to
store the code found.
6.
The code number changing stops
and the search is ended.
7.
Try out the functions. If everything
is okay, you can set the remote
control as described in steps 1 to
6 for other devices. If it is not
okay,
continue
described in 1 to 6.
5 Controlling devices
To control a specific device, first press a
device button, e.g. TV*) to control the
is
TV set and then the required function
buttons.
Volume control
With some devices that have no volume
control, such as video recorders, DVD
players, etc. you can control the volume
of the TV without having to press the TV
button first (Punch Through).
(D) Bedienungsanleitung
Universalfernbedienung
zur Steuerung fast aller Fernsehgeräte,
Satreceiver, DVD Player und Recorder,
DVB-Set Top Boxen (STB), CD Player
und anderer infrarotsteuerbarer Geräte.
as
1 Wichtig – Bitte lesen
Die Vivanco UR .ist vorprogrammiert für
die Steuerung von bis zu 10 Geräten,
um
beschädigte
oder
Originalfernbedienungen zu ersetzen.
Sie steuert die Grundfunktionen der
Geräte für die sie eingestellt wurde und
wurde
nicht
dafür
entwickelt,
Funktionen der Originalfernbedienungen
zu
ersetzen.
Sie
Fernbedienung
wie
"Kodeeingabe" beschrieben einstellen,
damit sie Ihre Geräte steuern kann.
2 Batterien einsetzen
Öffnen Sie das Batteriefach an der
Unterseite der UR, s. Fig. und setzen
3
searching
as
verlorene
alle
müssen
die
im
Abschnitt
