Wireless Master Flash Mode (Master Canon) - Rollei 56 Manual De Instrucciones

Note:
1 . Pay attention to the difference between Canon MASTER interface and Nikon
main control interface . It corresponds only to the camera's online operations .
2 . The Canon MASTER mode from the lamp mode is consistent with the MASTER
flash . The Nikon MASTER mode from lamp mode needs to be set in each group,
independent of the main flash .
3 . Wireless off mode: normal TTL/M/Multi flash mode .

Wireless MASTER Flash Mode (MASTER Canon)

Wireless MASTER flash mode (MASTER Canon) can be divided into:
1 . Automatic wireless control mode (E-TTL Auto MASTER Canon)
2 . Manual wireless control mode (Manual MASTER Canon )
3 . Stroboscopic wireless control mode (Multi stroboscopic MASTER Canon)
Press the A-button repeatedly until the LCD shows the Canon MASTER mode
'MASTER' .
Set the MASTER control unit
Wireless channel:
Press the [Wireless settings button] repeatedly until
the channel number is blinking . Press the left and
right button to set the wireless channel from 1 ~ 4 .
Set the MASTER control unit flash switch:
You can activate and deactivate the MASTER unit . Set MASTER flash: Press the
[Wireless Settings button] repeatedly until the
and right button to set the MASTER flash output mode . If the MASTER mode is
deactivated the icon
will be displayed .
Wireless channel number
will be displayed . If the MASTER mode is activated the icon
icon is flashing . Press the left
61