Idiomas disponibles
Idiomas disponibles
2
PROCEDURE STEPS:
1. Disconnect and isolate the negative battery cable.
2. Push mirror glass case (2) into full down position
3. Place thumbs behind mirror glass case (2) and push
out from the mirror assembly (1). This will disengage
the mirror glass case's snap attachment feature.
4. If equipped, disconnect both heater wires (1) by
pulling on thumb tabs.
5. Disconnect the mirror motor glass electrical connector
(2).
6. Remove the mirror glass case (1) from the glass motor
by pulling up and out. This will disengage the "hook"
feature at the bottom of the mirror glass case assem
bly (1).
Jun 01, 2010
K6860975
