Li-Ion Battery Charge Status Display - Hilti GPB 6X-A22 Manual De Instrucciones

Ocultar thumbs Ver también para GPB 6X-A22:

Manual de instrucciones (200 páginas)

Contenido

página de 53

/ 53
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

▶ If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable

location, well away from flammable materials, where it can be kept under observation and allowed to

cool down. In this case, always contact your Hilti Service.

Description

3.1

Overview of the product

3.2

Intended use

The product described is a hand-held, cordless satin finisher. It is designed for surface finishing processes

such as satinizing, structuring, polishing, brushing, smoothing, derusting or deburring steel, stainless steel

or non-ferrous metals.

▶ Use only Hilti Liion batteries of the B 22 series with this product.

▶ Use only Hilti battery chargers of the C4/36 series for charging these batteries.

3.3

Possible misuse

Do not use the product for wet grinding.

Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).

3.4

Items supplied

Satin finisher, pneumatic rubber roller, air pump, operating instructions.

Other system products approved for use with this product can be found at your local Hilti Store or online at:

www.hilti.group

3.5

Temperature-dependent motor protection

The temperature-dependent motor protection system monitors current input and motor temperature and

thus prevents the power tool overheating.

If the motor is overloaded through application of excessive working pressure, the power tool's performance

drops noticeably or it may stall completely.

If the power tool stalls or slows significantly due to overloading, release the pressure applied to the tool and

then allow it to run under no load for approx. 30 seconds.

3.6