Description - Fermax 1307 Manual De Instrucciones

IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder IP Decoder
IP Decoder. Description
4
5
1 MDS Connector : To connect the IP Decoder to the MDS/CAC system.
+,- : 12V DC power supply
D1, D2: RS-485 Data.
2: Residence-Entry Panel Audio Direction
6: Entry Panel-Residence Audio Direction
Ethernet Connector : To connect the IP Decoder to the Local Network or Internet.
2
3
ON: Switches on when the IP Decoder is powered up.
4 DL3. Connect ON: Switches on if there is any management software connected and
sending/receiving data.
DL2. MDS Data: Switches on if there is any MDS/CAC data traffic.
D6. LAN: Switches on when there is a connection to the ethernet network.
RESET:
5
- Short Press: re-starts the decoder.
- Long Press (over 3 seconds): re-establishes the IP Decoder's factory settings.
PORT: Dip-Switch which allows you to manually configure the IP Decoder's Listening
6
Port (see the «Configuration» section).
Advanced functions available for integration using newly developed software. For more
information, contact Fermax:
7
+, S1,S2, -: Digital Input. Activated by way of a current between S1 and S2.
NO, NC, C:Relay Output (free relay contacts) activated by way of commands.
8
1
6 2 D2 D1 - +
BUS
PC
MADE IN SPAIN
REF. 1307
ON IP CONFIG:
VERSION :
RST
BUS CONNECT.
ON
+ - D1 D2 2 6
1
7
- S1 S2
+
INPUT
DECODER IP DE DATOS
IP DATA DECODER
IP DATEN DECODER
DECODEUR DE DONNÉE IP
MDS
DATA LAN
DL3 DL2 D6
3 2
8
NO NC C
PORT
TEST AUDIO
AUDIO TEST
6
Page 5