Maintenance And Service - KRESS 108 AS 1,3 Manual Original

Maintenance and service

6. Maintenance and service
Maintenance and cleaning
Remove the battery from the device
before undertaking any work on the
device.
This safety measure prevents acci-
dental starting of the power tool.
 Always keep the machine and ventilation
slots clean.
 Regularly wipe off the plastic parts which are
accessible from the outside using a cloth
without cleaning agent.
 Always keep the tool holding fixture clean.
Service
After heavy use over a long period,
the machine should be taken to a
Kress service location for inspection
and thorough cleaning.
The relevant service centres are listed in the en-
closed appendix "SERVICE" or on the website
www.kress-elektrik.de.
Spare parts / exploded view
Exploded views and spare parts lists are available
on our home-page
http://spareparts.kress-elektrik.de
Environmental Protection
Recycle raw materials instead of dis-
posing them as waste. The machine,
accessories and packaging should
be sorted for environmental-friendly
recycling.
The plastic components are labelled
for categorised recycling.
Only for EC countries.
Do not dispose of electric tools
together with household waste mate-
rial!
In observance of the European Directive 2002/96/EC
for waste electrical and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an en-
vironmentally compatible recycling facility.
Do not dispose of battery packs/batteries into
household waste, fire or water. Battery packs/bat-
teries should be collected, recycled or disposed of
in an environmental-friendly manner.
Only for EC countries:
Defective or dead out battery packs/batteries
must be recycled according the guideline 2006/
66/EC.
Rechargeable batteries / Batteries
Lithium ion battery technology
Li-Ion
Nickel-cadmium battery
Caution! These batteries contain cad-
NiCd
mium, a highly toxic heavy metal
Nickel-metallic hydride battery
NiMh
 Before disposing of batteries, cover the bat-
tery contacts with the battery cap.
Return used or faulty battery packs via your spe-
cialist dealer or the KRESS Customer Service de-
partment or dispose of them in the prescribed
manner in public waste disposal facilities. This en-
sures that the battery packs are recycled as pre-
scribed.
Transport instructions
The battery has been tested in accordance with
UN manual ST/SG/AC.10/27/Add.2. It has effec-
tive protection against internal overpressure and
short circuiting as well as devices for the preven-
tion of violent rupture and dangerous reverse cur-
rent flow. The lithium-equivalent content in the
battery is below applicable limit values. Therefore,
the battery is not subject to national or internation-
al regulations pertaining to dangerous mediums,
neither as an individual component nor when in-
serted into a machine. However, the regulations
governing dangerous goods may be relevant
when transporting several batteries. In this case, it
can be necessary to comply with special condi-
tions (e.g., concerning the packaging).
For further information please contact the manu-
facturer.
English 29
EN
AkkuBS_CN-EN / 1004