Setting The Clock Automatically - Sony CDX-C8000RX Manual De Instrucciones

1
Press (DSPL/PTY) during FM reception
until "PTY" appears.
The current programme type name appears
if the station is transmitting the PTY data.
"- - - - -" appears if the received station is
not an RDS station, or if the RDS data has
not been received.
2
Press (DISC/PRST) repeatedly until the
desired programme type appears.
The programme types appear in the order
shown in the table. Note that you cannot
select "None" (Not specified) for searching.
3
Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.
When the unit finds the programme, the
programme type appears again for five
seconds.
"NO" and the programme type appear
alternately for five seconds if the unit
cannot find the programme type. It then
returns to the previously selected station.
24
Setting the clock
automatically
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press (MENU),
then press either side of (DISC/PRST)
repeatedly until "CT" appears.
2
Press (+) side of (SEEK/AMS) repeatedly
until "CT on" appears.
The clock is set.
3
Press (ENTER) to return to the normal
display.
To cancel the CT function
Select "CT off" in step 2 above.
Notes
• The CT function may not work even though an
RDS station is being received.
• There might be a difference between the time
set by the CT function and the actual time.