Locating A Disc By Name; List-Up - Sony CDX-C580R Manual De Instrucciones

Erasing the disc memo
1
Press (SOURCE) repeatedly to select CD.
2
Press (MODE) repeatedly to select the CD
unit.
3
Press (PTY/LIST) for two seconds.
4
Press (DSPL) for two seconds.
5
Rotate the dial to select the name you
want to erase.
6
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 5 and 6 if you want to erase
other names.
7
Press (PTY/LIST) for two seconds.
The unit returns to normal CD playback
mode.
Note
When the personalized label is erased, the original
CD TEXT information will appear in the display.

Locating a disc by name

— List-up (CD unit with the custom file
function or MD unit )
You can use this function for discs that have
been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 22).
1
Press (PTY/LIST) momentarily.
The name assigned to the current disc
appears in the display.
@ @
ENTER
If you add disc memo labels to a CD TEXT
disc, the display setting you make will
determine which information is displayed.
If the disc has only one set of information
(either CD TEXT or disc memo labels), that
information will be displayed regardless of
the display setting you make.
2
Press (PTY/LIST) repeatedly until you
find the desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• After a disc name has been displayed for five
seconds, the display goes back to normal
playback mode. To turn off the display, press
(DSPL).
• The track names are not displayed during MD
playback.
• If there are no discs in the magazine, "NO DISC"
appears in the display.
• If a disc has not been assigned a custom file,
"********" appears in the display.
• If the disc information has not been read by the
unit, "NOT READ" appears in the display. To load
the disc, first press the number button, then
choose the disc that has not been loaded.
• The information appears only in upper case.
There are also some letters which cannot be
displayed (during MD playback).
EN
23