Commissioning - SICK WL24-2 Manual De Operación

6

COMMISSIONING

6 Commissioning
10
Table 7: AC/DC relay
H
D
H
D
1 Alignment
Align the sensor with a suitable reflector. Select the position so that the red emitted light
beam hits the center of the reflector. The sensor must have a clear view of the reflector,
with no object in the path of the beam [see
openings of the sensor and reflector are completely clear.
Figure 4: Alignment
2 Sensing range
Adjust the distance between the sensor and the reflector according to the corresponding
diagram [see figure 6] (x = sensing range, y = operating reserve).
Relay
3
3
4
5
3
4
5
figure 4]. You must ensure that the optical
Figure 5: Alignment 2
WL24-2R2x0
AC/DC
3
<4 A (250 V AC)
<4 A (24 V DC)
4
<0.11 A (250 V
DC)
5
AC/DC
3
<4 A (250 V AC)
<4 A (24 V DC)
4
<0.11 A (250 V
DC)
5
8008783.Z474 | SICK
Subject to change without notice