JBL CINEMA
Quick Start Guide
Guide de démarrage rapide
7
Stereo / Harman Display Surround
8
Remote learning feature
The soundbar has the ability to learn the volume control and power infrared (IR) codes of your
IR TV remote control.
To program the soundbar to respond to your TV remote control:
1. Press and hold the top panel 'Surround' key until the system enters learning mode
(the LED will blink orange).
2. VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV
remote control.
3. VOLUME − : Press 'Volume –' on the soundbar and then press 'Volume –' on the TV
remote control.
4. MUTE: Press 'Volume +' and 'Volume –' together on the soundbar and then press
'Mute' on the TV remote control.
5. POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and
then pressing the 'Power' key on the TV remote control.
Note: After each TV IR code is programmed, the blinking orange LED will turn white for
1 second. The soundbar is ready to learn the next key after the white LED disappears
and the orange LED begins to blink.
Press and hold the top panel 'Surround' key again to exit learning mode (the orange
LED will stop blinking).
SB350
®
Stereo mode
Harman Display
Surround
LED
behavior
